€0,00
As a material, WITA® processes cataphoresis-coated armature castings and chromium-nickel steel. These proven materials guarantee high resistance and a versatile range of applications. All circulating pumps are supplied with heat insulation shells, seals, coupling plugs or permanently installed cables.
In an average household, 10 to 15% of the electricity consumption is caused by conventional standard pumps. Through the use of the WITA® high efficiency pumps the energy consumption can be compared to a conventional circulation pump. Approximately 80%.
The hydraulic power could be almost kept the same compared to standard pumps.
Special features / Product advantages
Nine different performancecurves can be selected by one-touch operation. In addition to the four characteristics which operate according to the proportional pressure method, four further can be selected with a constant characteristic curve. Additional, the pump has a minimum operating Level.
Max. pump lift | 6,0 m |
Max. flow rate | 3.600 l/h |
Power consumption | 3 – 42 W |
Control | 4 constant characteristics, 4 proportional characteristics, minimum operating level |
Supply voltage | 1 x 230V, 50 Hz |
Motor protection | No external motor protection required |
Ip rating | IP 42 |
Ambient temperature | 0 °C to +40 °C |
Media temperature | +5 °C to +110 °C |
Temperature class | TF 110 as per CEN 335-2-51 |
Max. system pressure | 10 bar |
Connection size | DN 15, DN 20, DN 25, DN 32 |
Installation lengths | 110 mm, 130 mm, 180 mm |
Pump housing material | 130 mm, 180 mm in variant in grey cast iron, cataphoresis coated;110 mm in brass |
Weight incl. insulation | 2,5 kg |
EEI | ≤ 0,20 |
Special equipment | Also available with PWM module, Venting program, Keylock |