As a material, WITA® processes cataphoresis-coated armature castings and chromium-nickel steel. These proven materials guarantee high resistance and a versatile range of applications. All circulating pumps are supplied with heat insulation shells, seals, coupling plugs or permanently installed cables.
In an average household, 10 to 15% of the electricity consumption is caused by conventional standard pumps. Through the use of the WITA® high efficiency pumps the energy consumption can be compared to a conventional circulation pump. Approximately 80%.
The hydraulic power could be almost kept the same compared to standard pumps.
Special features / Product advantages
Twelve different performancecurves can be selected by one-touch operation. In addition to the four characteristics which operate according to the proportional pressure method, four further can be selected with a constant characteristic curve as well as four with a constant pressure characteristic.
|Max. pump lift||7,0 m|
|Max. flow rate||4.600 l/h|
|Power consumption||7 – 70 W|
|Control||4 constant characteristics, 4 proportional characteristics, 4 proportional pressure characteristics|
|Supply voltage||1 x 230V, 50 Hz|
|Motor protection||No external motor protection required|
|Ip rating||IP 42|
|Ambient temperature||0 °C to +40 °C|
|Media temperature||+5 °C to +110 °C|
|Temperature class||TF 110 as per CEN 335-2-51|
|Max. system pressure||10 bar|
|Connection size||DN 15, DN 20, DN 25, DN 32|
|Installation lengths||110 mm, 130 mm, 180 mm|
|Pump housing material||130 mm, 180 mm in grey cast iron, cataphoresis coated; 110 mm in brass|
|Weight incl. insulation||2,5 kg|
|Special equipment||Also available with PWM module, Venting program, Keylock|