WITA® go.future – 60 LED 0-10V
26. September 2019
WITA® fixed-setpoint controller
15. November 2019
show all

WITA® Delta HE 120F 0-10V

0,00

As a material, WITA® processes cataphoresis-coated armature castings and chromium-nickel steel. These proven materials guarantee high resistance and a versatile range of applications. All circulating pumps are supplied with heat insulation shells, seals, coupling plugs or permanently installed cables.

In an average household, 10 to 15% of the electricity consumption is caused by conventional standard pumps. Through the use of the WITA® high efficiency pumps the energy consumption can be compared to a conventional circulation pump. Approximately 80%.
The hydraulic power could be almost kept the same compared to standard pumps.

Special features / Product advantages

  • Highest efficiency through EC permanent magnet motor technology
  • From 5 Watt min. input
  • One-touch menu navigation
  • Pre-selectable control modes constant speed / variable differential pressure
  • Anti-block function
  • Integrated motor protection
  • High start-up safety
  • Simple pipe mounting through a practical key attachment

 

Additional to the eleven different power curves which can be selected also at the Delta HE 120F without the PWM module, the PWM version also has four PWM stages. In these stages, the pump can be controlled with an external speed control. You can download the Delta HE 120F manual in our download area to find out more about the PWM function. The PWM control signal is also described in detail here. The LCD display shows the current power consumption, the selected characteristic curve and the night reduction.

Max. pump lift 12,0 m
Max. flow rate 10.150l/h
Power consumption 5 – 175 W
Control 5 constant characteristics, 6 proportional characteristics, night mode, 4 externaly controllable PWM characteristics
Supply voltage 1 x 230V, 50 Hz
Motor protection No external motor protection required
Ip rating IP 42
Ambient temperature 0 °C to +40 °C
Media temperature +5 °C to +110 °C
Temperature class TF 110 as per CEN 335-2-51
Max. system pressure 10 bar
Connection size DN 40, DN 50
Installation lengths DN 40 / 220 mm, DN 50 / 240 mm
Pump housing material variant in grey cast iron, cataphoresis coated
Weight incl. insulation DN 40 / 27,0 kg, DN 50 / 8,0 kg
EEI ≤ 0,23
 Special equipment  Speed control with PWM control signal possible