- EL ORIGINAL SOLO CON EL DIAMANTE
Manifold DN 25 (LDP)
1. marzo 2024
Actuator SM Mini KV
1. marzo 2024
Manifold DN 25/ DN 32
The DN25 and DN32 heating circuit manifolds are used for space-saving and rapid installation of the heating circuit system. After connecting the heat generator, up to seven heating circuits (direct, mixed) can be installed on the manifold with a flat seal, depending on the manifold design. The manifold is used for heating systems up to 110kW/270kW heat load. The manifold is supplied with an adjustable wall bracket and screw connection for convenient wall mounting.
| DN 25 | DN 32 | |
| Nominal diameter | DN 25 | DN 32 |
| Connection dimensions | 1 ½“ Rp | thermo-tap side top – 2“ Rp producer side bottom 1 ½» G |
| Center distance heating flow and return flow |
125 mm | 125 mm |
| Dimensions (H x W x L) | 2+0, 2+1: 190 mm x 160 mm x 500mm 3+0, 3+2: 190 mm x 160 mm x 750 mm 4+0, 4+3: 190 mm x 160 mm x 1000 mm |
2+0, 2+1: 190 mm x 160 mm x 500 mm 3+0, 3+1: 190 mm x 160 mm x 750 mm 4+0, 4+1: 190 mm x 160 mm x 1000 mm |
| Materials | EPP, brass, steel, EPDM seals | EPP, brass, steel, EPDM Seals |
| Field of application | 110 kW, up to 110 °C, Kvs 13 m³/h, 110kW |
270 kW, up to 110 °C, Kvs 29.3 m³/h |
| Operating pressure | max. 6 bar | max. 10 bar |
| Maximale Förderhöhe | |
| Maximaler Durchfluss | |
| Leistungsaufnahme | |
| Regelung | |
| Versorgungsspannung | |
| Motorschutz | |
| Schutzart | |
| Umgebungstemperatur | |
| Medientemperatur | |
| Temperaturklasse | |
| Systemdruck max. | |
| Anschlussgrößen | |
| Einbaulängen | |
| Material Pumpengehäuse | |
| Gewicht inkl. Isolierung | |
| EEI | |
| Sonderaustattung |
