As a material, WITA® processes cataphoresis-coated armature castings and chromium-nickel steel. These proven materials guarantee high resistance and a versatile range of applications. All circulating pumps are supplied with heat insulation shells, seals, coupling plugs or permanently installed cables.
In an average household, 10 to 15% of the electricity consumption is caused by conventional standard pumps. Through the use of the WITA® high efficiency pumps the energy consumption can be compared to a conventional circulation pump. Approximately 80%.
The hydraulic power could be almost kept the same compared to standard pumps.
Special features / Product advantages
Additional to the eleven different power curves which can be selected also at the Delta HE 120F without the PWM module, the PWM version also has four PWM stages. In these stages, the pump can be controlled with an external speed control. You can download the Delta HE 120F manual in our download area to find out more about the PWM function. The PWM control signal is also described in detail here. The LCD display shows the current power consumption, the selected characteristic curve and the night reduction.
|Max. pump lift||12,0 m|
|Max. flow rate||10.150l/h|
|Power consumption||5 – 175 W|
|Control||5 constant characteristics, 6 proportional characteristics, night mode, 4 externaly controllable PWM characteristics|
|Supply voltage||1 x 230V, 50 Hz|
|Motor protection||No external motor protection required|
|Ip rating||IP 42|
|Ambient temperature||0 °C to +40 °C|
|Media temperature||+5 °C to +110 °C|
|Temperature class||TF 110 as per CEN 335-2-51|
|Max. system pressure||10 bar|
|Connection size||DN 40, DN 50|
|Installation lengths||DN 40 / 220 mm, DN 50 / 240 mm|
|Pump housing material||variant in grey cast iron, cataphoresis coated|
|Weight incl. insulation||DN 40 / 27,0 kg, DN 50 / 8,0 kg|
|Special equipment||Speed control with PWM control signal possible|