WITA® SM 4.10 FR
30. March 2012
Minimix 3-way mixing valves
31. March 2012
alle anzeigen

WITA® SM 3

0,00

WITA® actuators are distinguished by a compact design, durability and versatility. The product is equipped with a reversible synchronous motor and a maintenance-free gear. Depending on the actuator type, the device is electrically connected via a lead or a terminal pre-assembled in the casing. The actuators are applied particularly in heating and air conditioningsystems, and can be used with 3-point controllers or switching contacts. Moreover, the product is available for DN15 to DN100 mixing valves.

SM 3 actuators are delivered with non-blocking toothed wheels made of metal (204 h), and are available in two versions, witha torque of 15 Nm or 30 Nm. Both versions are available witha quill drive shaft or a drive shaft with an adjustable yoke. Various adapters allow you to easily mount different components on the versatile console. The product is equipped with adjustable cams (by 15°; range:15°-345°), thanks to which you can set the angle freely. The angle is factory set to 90°. You can also adjust the angle manually by declutching the gear with a switch located on the casing. When manual adjustment is no longer necessary, the device will restart in normal mode. Optionally it can be delivered with a pre-assembled potential free limit switch. Dimensions are the same for all variants.
Operating voltage 230 V AC, 50 Hz   oder   24 V AC, 50 Hz +- 10% (Din IEC 600038)
Torque 15 Nm / 30 Nm
Angle of rotation 90° Factory setting

can be adjusted from15° to 345

Running tim 150 sec. /90°
IP protection class I
Protection typ IP 40
Ambient temperature 0 °C bis 50 °C
Storage temperature -20 °C bis 60 °C
Equipment
Non-blocking toothed wheels made of metal (BL240 h)
Drive shaft with yokes
Quill drive shaft
Aapters allow you to easily mount various components
Optionally it can be delivered with a pre-assembled potential free limit switch
Optionally it can be delivered with an operatingvoltage cable
and an additional limit switch
Can be combined with conventional heating controllers
 Version
SM 3.15 (15 Nm)

SM 3.30 (30 Nm)

Can be used with a 3-point controller for systems with motor-driven mixing valves.
SM 3.15H (15 Nm)

SM 3.30H (30 Nm)

Can be used with a 3-point controller for systems with motor-driven mixing valves.

The quill shaft allows you to mount easily in any mixing valve.

A drive shaft element indicates the position.